Paver sealing is a great way to keep them looking their best. It helps prevent stains from setting in and prevents dirt from becoming embedded in the grout lines, which can lead to staining and discoloration.
The sealant also helps protect your pavers from water damage, helping to maintain their integrity over time. If you’re concerned about your pavers’ longevity, sealing them is always a good idea.
It’s a great idea to invest in paver sealing Sarasota. Here are some of the reasons why:
- To Protect the Surface. Sealing the surface of your paver is like putting a layer of protection between the ground and your paver, which helps prevent cracking and other damage that can happen from things like weather, UV light exposure, and more.
- To Keep Your Pavers Looking Good for Many Years. Sealing your pavers will help ensure that they stay looking good for a long time by keeping them from absorbing moisture from rain or snow and preventing stains from sun exposure—both of which can cause discoloration and other damage over time.
- To Keep Your Paver Cleaner Longer. Because you’ll have a protective barrier between your paver surface and whatever might land on it (like dirt or bird droppings), you’ll find yourself needing to clean less often than if you hadn’t sealed them at all!
When it comes to cleaning your brick pavers, there are two main options: pressure washing and scrubbing.
Pressure washing is the most common method of cleaning brick pavers, but it can be difficult to do if you don’t have the right equipment. You’ll need a pressure washer that can handle hot water and has enough power to remove dirt and grime. If you don’t have one of these, you can rent one from your local hardware store or Home Depot.
After cleaning your pavers with the pressure washer, they may look clean on the surface, but there could still be some residue from dirt left behind in the crevices or between bricks. This is where scrubbing comes in handy—you can use a stiff-bristled brush like a toothbrush (or one specifically made for cleaning pavers) to get into those hard-to-reach areas and remove any remaining particles of dirt or grime from your pavers before sealing them with sealer or wax so they stay protected from future wear and tear.
Re-sanding brick pavers before sealing them is a crucial step in the process of maintaining your paver patio. While the sanding part might seem like a no-brainer, it’s important to know why you need to do it and how it will help:
The first reason for sanding your pavers is that without it, the sealant won’t adhere correctly. Without proper adhesion, the sealant won’t protect your pavers from moisture as well as it could be protected. This can lead to premature deterioration of your pavers over time.
Another reason for re-sanding brick pavers before sealing them is that it helps to fill any gaps between the joints of your brick pavers so that when you apply a sealant on top of them, the sealant doesn’t just run down into those gaps because they are too big for it to cover up entirely with just one coat (which would be ideal).
Lastly, re-sanding brick pavers before paver sealing them allow you to make sure that all parts of each joint have been properly cleaned so they are free from dirt, debris, and other substances that might prevent an effective bond between the concrete and any sealants applied.
In new paver construction, the previous step may have already been completed, and you can skip it. Remove any debris with a leaf blower or broom. Choose a high-quality brick paver sealer. There are many sealer finish choices, from matte to a wet look, depending on your preference. Apply the brick paver sealer with a contractor-grade metal pump-up sprayer. The plastic sprayer is less expensive, but it will not work properly.
Start at one end and apply an even coat of paver sealer. Be sure to cover all the bricks and sand joints. It may be necessary to use a brush to cut in the edges. Once the surface is completely and evenly covered with sealer, rope it off to keep people and animals off for at least 24-48 hours while the sealer cures.
If you have the time and patience, sealing patio pavers is a doable DIY project. However, there are many factors that can make this job more challenging than it seems—including the weather, which can cause your sealer to dry at different rates depending on how sunny or rainy it is. You’ll also want to be careful about which sealer you use; some sealers can damage certain materials, like your concrete.
If you’re thinking about paver sealing your own patio pavers but aren’t sure where to start, we recommend hiring a professional to help guide you through the process.