Mark Roemer Oakland Explains How to Keep Your Home’s Water Running Smoothly

by lalaes Home Improvement

Introduction

According to Mark Roemer Oakland, after a long and hard day when you enter the shower to relax and wash away all the sweat and dirt along with the fatigue, you need consistent water pressure. Without that, your day is ruined. Let’s check out how you can keep your home’s water running smoothly.

 

The Details

 

  1. Check with your neighbor – When the water pressure in your home isn’t right, check with your neighbor. If your neighbor is experiencing the same problem, this may be an issue with the city’s municipal water system and everyone in your neighborhood is suffering at the same time.

 

Citywide stems are subject to clogs, leaks, and corrosion and you can contact your local authorities for more information. You can also check the water pressure yourself with a water pressure test gauge. According to experts, it should be around 60 to 70 psi. Otherwise, the pressure is too high or too low.

 

  1. Check the well pump – If you live in a remote location, you probably get water from a well drilled deep into the ground. The well pump is responsible for pumping water from the ground to your home and something may be wrong with it. For instance, centrifugal-style pumps don’t operate well with deep wells. Similarly, a submersible pump may not be working well if it has remained unserviced for a long time.

 

  1. Clear the clogs – Over time, pipes develop a buildup of materials in the form of mineral deposits that can create clogs. The situation may be very bad if you get hard water in your area. Clogs can kill water pressure and slowly chip away at the life of those pipes. Fortunately, you can clean those clogs with vinegar and baking soda along with a plumbing snake. In extreme cases, pipes may need to be replaced.

 

  1. Check the main water valve – After routine checkup and maintenance, the main water valve may be closed or left partially open. The same may happen after some plumbing repairs. Check the main water valve that controls the water supply to your home and open it up all the way. After that, check the water pressure and adjust accordingly.

 

  1. Patch those leaks – If you have damaged or cracked pipes, it may result in water leaks. Water leaks don’t just result in low and inconsistent water pressure, but also increase your water bill immensely. Some pipes are more prone to damage than others.

 

For instance, galvanized steel pipes are more prone to corrosion. Check for signs of leaks like a damp spot or bloated and moldy walls. In these cases, you need to hire a professional. Apart from the pipes, you may also need some structural repairs for your home.

 

Conclusion

Mark Roemer Oakland suggests that you don’t allow inconsistent water pressure to ruin your experience. Use the above-mentioned tips to clear the clogs, get rid of leaks, and or even install a home water pressure booster. You can also seek professional help if everything else fails.